TS2 H3 Diag H2 CFG

images
CCIE R&S Lab

TS2

1.VACL is wrong,change access-list ,no seq 10 and no seq 30
2.no ip ospf cost 9 (the interface of SW111 connect R15)
3.R23 loopback: OSPF process is wrong ,change OSPF 10 to OSPF 1
R22 and R23 use origina to control path, compare R12 and R13
SW210 ping 10.254.101.1 one of the hop is wrong ,,R13 interface add ip os cost 11
4. R21 had config LP,but do not use it
5. R60 tunnel mask is /32,change to /24
6. SW111, OSPF DO NOT network VLAN 2001,
R15 redistribute OSPFv3 to BGP

7.R10 ospf config “DISTANCE OSPF EXTERNAL 19” ,change 19 to219.
R3 RT import wrong,R5 lo0 network wrong ospf process
8. SW300,SW301,SW310. add “IP ARP INSPECTION TRUST” Under PORT-CHANNEL.
9.R24 change tunnel interface ospf network,ip os net p2mp change to p2p
10.
ip nat inside source static 123.45.67.100 10.2.200.1
Change to
ip nat inside source static 10.2.200.1 123.45.67.100

ip nat inside source static 201.99.70.2 201.99.25.70
Change to
ip nat outside source static 201.99.70.2 201.99.25.70



Cisco Pass Report View More >

CCIE RS Written
Oct 22, 2018
CCIE RS Written
CCIE RS Written
Oct 21, 2018
CCIE RS Written
CCIE RS Written
Oct 20, 2018
CCIE RS Written
CCIE RS Written
Oct 19, 2018
CCIE RS Written
CCIE Wireless Lab
Oct 19, 2018
CCIE Wireless Lab
CCIE RS Written
Oct 19, 2018
CCIE RS Written
CCIE RS Written
Oct 18, 2018
CCIE RS Written
CCIE Data Center Written
Oct 18, 2018
CCIE Data Center Written
CCIE RS Written
Oct 18, 2018
CCIE RS Written
CCIE RS Written
Oct 17, 2018
CCIE RS Written